24V Flexible LED Strip

24V flexible led strips make it possible to stick led lighting anywhere in your home, office, or art installation, freeing you from the constraints of wiring and cords. You can stick led strip lights on the back of your TV, along your hallway, or in any led light niche. The led strip lights come with an adhesive back, which is effortless to install.

Model No.	UTFS-TS1180-2410
LED Qty:	180pcs/m
Voltage:	DC24V
Wattage:	15W/M
CCT:	2700K/3000K/4000K/6000K
CRI:	>90Ra

Description Specification Application FAQ Downloads

24V Flexible LED strips with high CRI LEDs from Unitop

Standard features:

– It has high brightness and low power consumption.

– The lifespan is up to 50,000 hours.

Emotional features:

– You’ll feel safer with these 24V flexible LED strip in your home because they’re so bright it will deter any burglars from coming inside.

– Your children will sleep better at night knowing that the led strips have been installed on their bedroom ceiling because it makes them feel less scared of the dark.

– You can install 24V led flexible strip in any area you like, for example, the under-counter lighting in your kitchen or even behind your TV.

Unitop 24V flexible LED strips with high CRI LEDs has various CCT options as below:

Our 24V flexible LED strip comes with various IP rating options:

The cutting size of our Unitop flexible LED strip:

cutting dimension of 24V flexible LED strip

This Unitop 24V flexible LED strip is with below lumen information:

CCT (°K)	Efficacy	Lumen/M
2700K	90.26lm/W	1412.4lm/m
3000K	90.26lm/W	1412.4lm/m
4000K	94.77lm/W	1483lm/m
6000K	94.77lm/W	1483lm/m

How to install our 24V flexible LED strip? You can find the wire diagram as below:

Want to know the packing information? See below:

Below two cautions need your highest attention:

Please also pay attention to below issues while installing our 24V flexible LED strips:

Installing flexible LED strip is a straightforward process and can be done by anyone. We will show you how to install Unitop 24V LED flexible strip lights in just a few easy steps.

1. Determine where you want to install the flexible LED strip.

2. Make sure that the surface is clean and dry.

3. Remove the adhesive backing from the LED strip light.

4. Align the flexible LED strip with the desired location and press down firmly.

5. Connect the power supply to the flexible LED strip.

6. Turn on the power supply and enjoy your new flexible LED strip!

24V LED flexible strip has a wide range of applications, which include:

– Architectural Lighting

– Cove Lighting

– Signage Lighting

– Channel Letters

– Backlighting

– Cabinet Lighting

– Decorative Lighting

– Emergency Vehicle / Tow Truck Lights & Other Use

Listed below, you will find some examples of the applications:

Back Lighting

Cove Lighting

Under Cabinet Lighting

Under Counter Lighting

Below you will find the FAQ of Unitop 24V flexible LED strips with high CRI LEDs:

How much voltage should be used to run Unitop flexible LED strip?

The led lights on a led flexible strip should be powered by 24 volts. However, some led flexible strips come with a 12-volt power supply. If an led flexible strip has led lights that require too much voltage, the led strip will not light up, or the led lights on led flexible strip will burn out quickly.

How many flexible LED strips can be put together?

There is no limit to the number of led flexible strips that can be put together. However, it is essential to remember that the total wattage of all the led flexible strips combined should not exceed the maximum wattage for the led flexible strip.

There is no limit to the number of led strips that can be put together.

Maximum wattage for led strip led light is 60watts/meter, so in theory, you could have 30 meters of led strip led light on 1 power supply.