Fita Flexível LED com CRI 90Ra Top SMD2216 240LEDs/M

Unitop LED flex ribbon is one of the most popular and versatile options for adding more lighting to your home. The LEDs in this type of strip are arranged along a thin, flat cable that can be cut down to any length you need and connected together with an adhesive backing. They’re perfect for under cabinets, desks, or anywhere else where you want some extra illumination!

Modelo No.	UTFS-TS2240-2407
LED Qtd:	240pcs/m
Tensão:	DC24V
Potência:	14W/M
CCT:	2700K/3000K/4000K/6000K
CRI:	>90Ra

Descrição Especificação Aplicação FAQ Transferências

LED flex ribbon with high CRI SMD2216 LEDs from Unitop

LED flex ribbons are a great way to light up your space. They have a lot of advantages over traditional incandescent and fluorescent lights.

Very low power consumption

LED flexible strip consumes only 1/3 the electricity and lasts 10x longer than other led lights for increased energy efficiency.

Cost savings

LED strips are comparatively cheaper to run, offer a 12-year expected life span, and do not need any ballast, transformers or drivers as they will just plug into your current lighting circuit.

Great light effect

LED lighting strips create perfect ambiance by emitting true daylight color and never hot glare – especially important in home offices where you might be working long hours.

Fit in any small space

LED flex ribbon is thin and can be shaped to fit in any small space – perfect for tight corners, around furniture or under cabinets.

No heat

LED flexible lights emit virtually no heat, meaning they are cool to the touch and safe to use around children and animals.

Cuttable

LED flex strip lights can be cut to shorter lengths at designated spots.

Easy installation

LED flexible ribbon strips are easy to install, just plug into the mains and switch on. No complex wiring is required.

Unitop LED flex ribbon with high CRI LEDs has various CCT options as below:

A nossa fita flexível LED SMD2216 é fornecida com várias opções de classificação IP:

Fita flexível LED Opções de classificação IP

The cutting size of our Unitop LED strip lighting

This Unitop 24V 90Ra LED ribbon flex is with below lumen information:

CCT (°K)
2700K
3000K
4000K
6000K

Eficácia
99lm/W
99lm/W
104.11lm/W
104.11lm/W

Lumen/M
2096lm/m
2096lm/m
2204lm/m
2204lm/m

How to install our 90Ra CRI flexible LED lightings? You can find the wire diagram as below:

Quer saber as informações sobre a embalagem? Veja abaixo:

A seguir, dois cuidados que requerem a sua maior atenção:

Cuidados a ter com as fitas flexíveis LED

Please also pay attention to below issues while installing our LED flex ribbons:

Installing LED flex ribbon can be a daunting task, but with a little know-how, it’s a breeze. Here are some tips to help you get started:

– Measure the length and width of the LED flex ribbon.

– Cut LED ribbon strip to size if necessary.

– Peel off the 3M adhesive tape on the back of led strip and seal it securely in place.

– Ensure led light strip is placed securely in place and turn led strip on to make sure it works properly. If led strip does not work properly, try checking if led flexible strips are connected correctly or if they need replacement (if necessary).

LED flex ribbon can be applied in the following areas:

– led flex lights for cars

– led strip lights for boats

– led flex strip for advertising

– led lightig strips for home decoration

– led flexible lighting for backlight

– led flex tape for holiday decoration

– led ribbon flex as a industrial lighting solution.

Abaixo encontra alguns exemplos de aplicações:

Iluminação traseira

Iluminação Cove

Iluminação sob o armário

Iluminação sob o balcão

Below you will find FAQ of Unitop LED flex ribbon with high CRI LEDs:

What is CCT of led flex ribbons？

The color temperature of LED flex ribbon is measured in Kelvin. LED flexible strips come in a variety of different colors and each color has a different Kelvin rating. For example, a warm LED flexible strip might have a color temperature of 2,700 Kelvin, while a white LED flex strip might have a color temperature of 5,000 Kelvin. This is important to keep in mind when you are choosing an LED flexible light because you will want to choose the color that best suits your needs.

What is CRI of led flex ribbons？

Color Rendering Index (CRI) is very important for LED flex ribbon, as it determines the quality of light emitted by a product. In order to make sure that the light is as natural as possible, it is important to have a high CRI rating. The CRI of led flexible strip is usually above 80, which is great for creating natural lighting. Currently most of Unitop LED flex strip is above 90 which is even better.