Side Bend LED Neon Flex is intended to bend on a horizontal axis and emit light from the side of the silicone housing. It is also called Side Emitting LED Neon Flex or Horizontal Bending LED Neon Flex.
Due to their IP67 rating, these Neon Strips can technically be used in any place. They are widely used to create wall designs, signs, writing, squiggles, and curves for indoor and outdoor lighting applications.
We call our LED Neon Flex LED Neon Strip, LED Flex Neon, or LED Neon Light.
LED Neon Flex Strip Lighting comprises a number of Light-Emitting Diodes (LEDs) put on a strip and connected to a circuit. They are installed on a flexible rather than a rigid strip, which is indicated by the word “flex.” Furthermore, LED neon flex lights are covered in clear PVC or silicone to protect the LEDs and the circuit board.
Unitop Side Bend LED neon flex has passed various tests in our factory and outside labs. We guarantee that we will never put any products to market without rigorous tests being done. So you can trust the outstanding quality of our Side Bend LED neon flex.
The LEDs that we are using are large chips. They are highly efficient. Only 1-bin LEDs were used in every production. Unique circuit design using 7 LEDs per group to increase lighting efficacy. You don’t have to worry about the brightness.
Reduces voltage drop, max. 10m single run with 3Oz FPCB. Reliability is improved through an anti-break design. High-quality silica gel that is flame-resistant, UV-resistant, salt- and alkali-resistant, and resistant to high temperatures.
You will never be concerned about the installation because you have the option of installing by aluminum profiles, mounting clips, or bendable profiles. The end caps on this LED neon flex provide cable outlets on the top, bottom, or side.
Are you interested in learning more about any of our Side Bend LED Neon Flex Rope Light? We provide the full selection for choice as one of the top manufacturers and suppliers in China. Just click on Model No. in the below sheet.
| Model No. | Dimension | Standard Length | Color | CRI | Angle | Voltage | Wattage | Lumen | IP Options | Spec. & Reports |
|---|---|---|---|---|---|---|---|---|---|---|
| UTNF-SB0410 | 4x10mm | 5M/30M | 2100K, 2700K, 3000K, 3500K, 4000K, 5000K | ≥90Ra | 110° | DC24V | 8W/M | 24lm/W 195lm/M | IP67 | Download |
| UTNF-SB0812 | 5x12mm | 5M/30M | 2100K, 2700K, 3000K, 3500K, 4000K, 5000K, 2700K+5000K, RGB | ≥90Ra | 110° | DC24V | 10W/M | 33lm/W 330lm/M | IP67 | Download |
| UTNF-SB1220 | 12x20mm | 5M/30M | 2100K, 2700K, 3000K, 3500K, 4000K, 5000K, 2700K+5000K, RGB, RGBW | ≥90Ra | 110° | DC24V | 12W/M | 28lm/W 335lm/M | IP67 | Download |
| UTNF-SB1225 | 12x25mm | 5M/30M | 2100K, 2700K, 3000K, 3500K, 4000K, 5000K, 2700K+5000K, RGB, RGBW | ≥90Ra | 160° | DC24V | 12W/M | 35lm/W 418lm/M | IP68 | Download |
You may be happy to find the tests done on our Side Bend LED Neon Flex to ensure outstanding quality.
Test flame duration is 30S±1S, flame is applied to a vertical or horizontal edge.
Light on and under 60±5℃ and RH90% humidity for 168h(7 days).
IP67, and IP68 tests compliance with IEC60529:2013.
Sodium chloride: 50g/L±5g/L, pH: 6.5 to 7.2 for 48h.
168 hours in a sealed environment at -45°C.
100 rounds cycle test at -40°C for 30 minutes and +60°C for 30 minutes.
Fix on the test machine and light it on, test 1000rpm, speed 60rpm/min.
0.89w/(m²·nm@340nm, 8h UV at 60(±3)℃, 4h Condensation at 50(±3)℃ for 72h.
Can’t find what you need in the above products. Be relaxed. Any OEM or ODM is acceptable to us. We’d be grateful if you sent us your specific requests. We’ll study and reply to you straight away.
Below are a few examples of how you use our Side Bend LED Neon Flex.
Having a problem making a choice about which neon flex to buy? Don’t worry. You will find many articles and blog posts from which you can learn more before deciding.
Are you interested in the common questions most people are asking? Or perhaps you’re looking for solutions to your questions. Please pay close attention to this area.
Will Side Bend LED Neon Flex become hot if used for a long time?
Side Bend LED Neon Flex doesn’t release heat, making it safe to use in environments with lots of direct contacts. Use in virtually any application is secure.
What is the typical wattage of Side Bend LED Neon Flex?
Unitop Side Bend LED Neon Flex consumes only around 8W-10W power. So it will save a lot of energy for you.
Can I install Side Bend LED Neon Flex by myself?
Installation of Side Bend LED Neon Flex is quite easy, however, we strongly suggest that you can go to each product page, we have a detailed installation guide inside.
Can I dim your Unitop Side Bend LED Neon Flex? Which dimming device can I use?
You can dim (0–100%) the single-color LED Neon Flex with a PWM controller. There are totally 3 dimming options for our neon flex: 0-10V, DMX512, and the Dali system.
Can I use a controller with Top Bend LED Neon Flex?
You can only use controllers on our tunable white, RGB, or RGB Side Bend LED Neon Flex to achieve the many functions you want. However, for single color, you can not use controllers.
Which colors/CCT can you offer for your Side Bend LED Neon Flex?
Unitop Side Bend LED Neon Flex comes with below colors:
2100K, 2700K, 3000K, 3500K, 4000K, 5000K, 2700K+5000K, RGB, RGBW.
How flexible is Unitop Side Bend LED Neon Flex?
Depending on different models, the minimum bending radius of our Side Bend LED Neon Flex is 30mm or 60mm.
Can Unitop Side Bend LED Neon Flex be used outdoors?
IP67 and IP68 are exactly designed for outdoor use, so please do not worry!
What is the life span of Unitop Side Bend LED Neon Flex?
The common life span of Side Bend LED Neon Flex is 50,000~80,000h, however, you can use 5-10 years without any problem.
Can Side Bend LED Neon Flex be cut and reconnect ?
On the side bend LED Neon Flex, you can clearly see the cutting marks. It is so easy to cut and reconnect. We have detailed steps on each product page.
How you you install Side Bend LED Neon Flex?
We offer three installation ways for our Side Bend LED Neon Flex: a. Aluminum profile installation. b. Bendable profile installation. c. Installation by mounting clips. Just choose whatever you want.
We hope you already have a clear understanding of our Side Bend LED Neon Flex. So the next step, maybe you want to get the prices from us. Please fill in the below form and send us immediately.
