This flexible COB LED strip with 320 LEDs/M, 8mm width PCB belongs to our Basic Series which is the most cost-effective solution. If you are looking for the lowest prices, this can be the perfect solution. While low prices do not mean low quality, we also offer 3 years warranty for all our strips.
| Nº de modelo | UTFS-BSCOB320-2408 |
| LED Cant: | 320pcs/m |
| Tensión: | DC24V |
| Vataje: | 4,5 W/M |
| CCT: | 2700K~6500K |
| CRI: | >90Ra |
¿No quiere ver puntos de luz en las tiras LED? ¿Por qué no prueba las tiras LED COB flexibles Unitop? Incluso comparando con las tiras LED con LED SMD2110, 700LEDs/M, verá que la tira LED COB es mucho más suave y sin puntos de luz.
The CRI of the COB LEDs we use is more than 90Ra. Thus, we call our COB LED strip a High CRI COB LED strip. Generally speaking, CRI(color rendering index) values of 90 and above are excellent. However, values below 80 are generally considered not good.
Want minimum yellow spots? Unitop COB LED strips have smaller viewing angles of yellow spots than other strips available in the market. You will feel more comfortable under such a humanistic lighting environment.
¿No quiere sentirse fatal con las luces? Necesita una tira LED COB de mayor saturación cromática. Gracias a la elección del mejor fósforo y banda de núcleo.
Chips are chosen based on minimum voltage current scope, and the used Phosphofor for each color temperature chip is from the same chip brand and type. This ensures all the strips which we provided with the same color. You will get even no complaints from your clients about the color difference.
Still, worry about the heat dissipation of the strips? Thanks to the Inverted COB Gold-Free Technology, the heat is released directly through the FPC, and you will feel cooler on COB LED strips than on common LED strips. Finally, there will be no complaints from your clients about LEDs burnt out due to heat problems.
The highest quality flexible circuit board(FPCB) is chosen to ensure no difference in brightness from the beginning to the end. Below you will see which types of FPCB we are using. You will feel assured about the quality of our strips.
There are minimum cutting lines and pads on the COB strips. As the distance between two LED chips is too close, we suggest you cut the COB strips while light on the strips with lower current. Typically DC12V COB LED strips can be cut every 25mm, while DC24V COB LED strip lights are cuttable every 50mm.
Not only the chips but also the silicone which we used shall be the best quality without light spots and uniform brightness. The silicone gel which is used has below advantages: soft, smooth, and strong adhesion. Low-quality silicone gel is fragile and easy to be separated from FPC.
Want waterproof-type COB LED strips? Try from Unitop, please. We have 4 types: IP65(Silicone Glue), IP66(Silicone Tube), IP67(Extrusion Molding), and IP68(Silicone Tube & Silicone Glue). With waterproof technology, you can use our COB strips in any situation you want. P.S.: Our best-seller Basic Series COB LED strips are currently available in IP20, IP65, and IP66.
| Nº de modelo Unitop | Color | CCT | CRI | Ángulo de visión | Lumen LM/M | Eficacia LM/W | Tensión de trabajo | Corriente (mA/M) | Potencia |
|---|---|---|---|---|---|---|---|---|---|
| UTFS-BSCOB320-2408WW | Blanco cálido | 2700K | ≥90Ra | 180° | 400 | 88.9 | 24VDC | 187.5 | 4,5 W/M |
| UTFS-BSCOB320-2408WW | Blanco cálido | 3000K | ≥90Ra | 180° | 427.1 | 94.9 | 24VDC | 187.5 | 4,5 W/M |
| UTFS-BSCOB320-2408NW | Blanco natural | 4000K | ≥90Ra | 180° | 477.5 | 106.1 | 24VDC | 187.5 | 4,5 W/M |
| UTFS-BSCOB320-2408CW | Blanco frío | 6500K | ≥90Ra | 180° | 495 | 110 | 24VDC | 187.5 | 4,5 W/M |
1. Sugirió la instalación de Tiras de LED COB ser realizadas por el fabricante, el agente u otras personas cualificadas.
2. Por favor, estudie las especificaciones anteriores antes de la instalación.
3. Los datos anteriores se basan en nuestro producto estándar. Por favor, sujétese a los datos reales de su producto si hay una ligera diferencia.
4. Los diagramas esquemáticos anteriores son de nuestro producto estándar. Por favor, sujétese a su producto existente si hay una ligera diferencia.
5. La potencia del controlador LED debe ser al menos 1,2 veces la potencia total de las tiras LED utilizadas para la fuente de alimentación.
6. Por seguridad, no conecte las tiras directamente a la corriente alterna.
7. Cualquier sustancia ácida o alcalina está prohibida.
8. Sin previo aviso en caso de actualización de este producto o de sus especificaciones.
9. Unitop se reserva el derecho final de explicación de la especificación anterior.
Because this series of strips are our most cost-effective version, if you are looking for the lowest prices, this can be the perfect choice for you.
COB LED strip with 320LEDs/M, 8mm width PCB
Tira de LED COB con 320LEDs/M, 10mm de ancho PCB
